Nvidia ® Tesla™ Gpu Computing Modules (Optional) - Asus ESC4000 G2 User Manual

2.8.4. NVIDIA
Follow the steps below to install the optional NVIDIA
modules to the system.
1. Locate and loosen the thumbscrew
in front of the NVIDIA
computing module bracket.
2. Firmly hold the bracket, and then
pull it up to detach it from the
motherboard.
3. Connect the red end of the 8-pin
power cable to the power connector
on the GPU computing module.
4. Thread the white end of the 8-pin
power cable through the airduct of
the GPU computing module.
2-26
Tesla™ GPU computing modules (optional)
®
Tesla™ GPU
®
Tesla™ GPU computing
®
Chapter 2: Hardware setup