Asus ESC4000 G2 User Manual page 130

Using New Configuration
When a RAID set already exists, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option
From the Management Menu, select Configure > New Configuration, and
1.
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Follow step 2 to 9 of the previous section: Using Easy Configuration.
2.
Select Size from the Virtual Drive menu, and then press <Enter>.
3.
4. Key-in the desired virtual drive size, and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Follow step 10 to 14 of the previous section: Using Easy Configuration to
5.
create the RAID set.
6-10
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Clear Existing Configuration And Start A New Configuration
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Virtual Drive(s) Configured
LD RAID Size
Easy Configuration - ARRAY SELECTION MENU
0 1 148.580GB
0
1
Enter VD Size: 152146_
Virtual Drive 0
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size:
A.10.09231523R
A.10.09231523R
#Stripes StripSz
2 64 KB
PORT #
DNLIN A00-00
DNLIN A00-01
Status
ONLINE
Chapter 6: RAID configuration