Epson AcuLaser CX16 User Manual page 54

❏ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
❏ Been presealed
Label
A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet:
❏ The face sheet must follow the plain paper specification.
❏ The face sheet surface must cover the entire carrier sheet, and no adhesive should come through
on the surface.
You can print continuously with label sheets. However, this could affect the media feed, depending on
the media quality and printing environment. If problems occur, stop the continuous printing and
print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement. Check your application
documentation for more information on printing labels.
Capacity
Orientation
Driver Media
Type
*1
Duplexing
*1
Only for AcuLaser CX16NF
Use label sheets that are
❏ Recommended for laser printing
DO NOT use label sheets that
❏ Have labels that easily peel off or have parts of the label already removed
❏ Have backing sheets that have peeled away or have exposed adhesive
Note:
Labels may stick to the fuser, causing them to peel off and media misfeeds to occur.
Tray 1 Up to 50 sheets, depending on their thickness
*1 Not supported
Tray 2
Face up
Labels
Not supported
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Media Handling 54