Setting A Copy Function - Epson AcuLaser CX16 User Manual

2in1 Copying From the Original Glass
1. In the main screen (Copy mode), press the u or d key to select the current page layout setting, and
then press the Select key.
2. Press the u or d key to select 2in1, and then press the Select key.
The zoom ratio is automatically set according to the specified media size. Change the zoom ratio if
necessary.
3. Position the first page of the document on the original glass.
Note:
For details on positioning the document on the original glass, refer to "Placing a document on the
original glass" on page 69.
4. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
Scanning of the document begins.
Note:
In order to perform duplex (double-sided) copying or collated (Sort) copying with 2in1 copying,
specify the necessary settings before performing step 4. For details, refer to "Setting Duplex (Double-
Sided) Copying (AcuLaser CX16NF only)" on page 86 and "Setting Collated (Sort) Copying
(AcuLaser CX16NF only)" on page 88.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
6. Repeat step 5 until all document pages have been scanned.
If 2in1 is set, printing automatically begins after two document pages (four document pages if
duplex (double-sided) copying was set) have been scanned.
7. After all document pages have been scanned, press the Start-Color key or the Start-B&W key to
begin printing the remaining pages.

Setting a Copy Function

ID card copying, repeat copying and poster copying can be set.
Note:
❏ If a copy function other than NORMAL COPY has been set, the zoom ratio is automatically set (and
cannot be changed).
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Using the Copier 82