Table of Contents
Advertisement
Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the printer, we recommend that you use
the NET USE command, as follows:
1. Right-click the Network Neighborhood icon or My Network
Places icon and then select Properties.
2. Check that Client for Microsoft Networks is in the
Components list. If it is not installed, click Add to install it.
3. Run the command prompt and then enter the following
command.
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and select Properties.
3. Click the Details tab and select the port you have set using
the NET USE command.
Installing the Printer Driver
5
5
5
5
5
5
5
5
5
5
5
5
103
Advertisement
Table of Contents
