Table of Contents
Advertisement
Chapter 2
How to Set Up the Print Server
This chapter explains how to set up the print server. This includes
connecting the print server to the network, installing EpsonNet
WinAssist/MacAssist, and using EpsonNet
WinAssist/MacAssist to assign an IP address to the print server.
Connecting the Print Server to the Network
Follow the steps below to connect the print server to the network.
Warning:
w
Before you install or uninstall the print server, be sure to turn off
the printer to prevent electric shock.
1. Make sure the printer is turned off. If you are using an ink jet
printer, unplug the power cord from the wall outlet.
2. Insert the print server in an optional interface slot and tighten
the screws. For more details, see the manual shipped with
your printer.
3. Initialize the print server. To do this, turn on the printer while
holding down the status sheet button for twenty seconds to
initialize the print server. While the orange Status light and
the yellow Data light are on, initialization is in progress.
How to Set Up the Print Server
2
2
2
2
2
2
2
2
2
2
2
2
31
Advertisement
Table of Contents
