Using The Net Use Command - Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server User Manual

6. Click OK in the Install From Disk dialog box.
7. Select the model name of the printer, and then click Next.
Note:
If the Add Printer wizard prompts you to select either Keep
existing driver or Replace existing driver, be sure to select the
Replace existing driver radio button.
8. Click Finish and then follow the on-screen instructions to
complete the setup.
When you print using Microsoft Network Shared printing in
the Windows XP/Server 2003/2000/NT environment, see
"Using the NET USE command" on page 109 for more details.

Using the NET USE command

If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the printer, we recommend that you use
the NET USE command, as follows:
1. Click Start, click Control Panel, click Network and Internet
Connections, and then select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area
Connection icon.
3. Under Network Tasks, click Change settings of this
connection.
4. Check that Client for Microsoft Networks is installed. If
necessary, click Install to install it.
5. Run the command prompt and then enter the following
command.
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Installing the Printer Driver
5
5
5
5
5
5
5
5
5
5
5
5
109