Table of Contents
Advertisement
TCP/IP
IP Address Settings
Items
Method for Acquiring the
IP Address
IP Address
Subnet Mask
Default Gateway
Set Using Automatic
Private IP Addressing
(APIPA)
Set Using PING
DNS Server Address Settings
Items
Acquire DNS Server
Address Automatically
DNS Server Address
Explanations
Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available.
To use the DHCP server, make sure it is installed
on your computer and correctly configured.
See your operating system's online help for
detailed instructions.
To set the IP address manually, select Manual.
Enter an IP address for the print server. Be sure
the IP address does not conflict with any other
devices on the network.
Set the subnet mask.
Set the gateway address if needed.
Select Enable to get a private address
between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot be
obtained by the DHCP server; otherwise,
select Disable.
Enables or disables IP address setting using the
ping command.
Explanations
Select either Enable or Disable to acquire the
DNS server address from the DHCP server.
Enter the DNS server address. When the DHCP
server does not respond even Enable is
selected for Acquire DNS server address
automatically, the DNS server address set
here is used.
EpsonNet WebAssist
10
10
10
10
10
10
10
10
10
10
10
10
213
Advertisement
Table of Contents
