Changing The Scan Feature Settings - Dell 2355 Mono Laser User Manual

Changing the Scan Feature Settings

The following table shows the options you can select.
Original Type Original Size
Text, Letter, A4,
Text & Photo, Executive,
Photo Statement, JIS
B5, A5, A6
NOTE:
600 dpi resolution is available in color scanning only when additional memory DIMM is
installed.
Press Scan from the home screen.
1
Press the left/right arrows to select USB.
2
Press the Next (
3
Click Options to adjust the settings for each scan.
4
• Original Type: Sets the original's type.
Original Size: Sets the image size.
•
• Resolution: Sets the image resolution.
• Scan Color: Sets the color mode. If you select Mono in this option, you cannot select JPEG
in Scan Format.
• Scan Format: You can select the file format before you proceed with the scanning job. If
you select Mono in Scan Format, do not select JPEG. Depending on the selected scan
type, this option may not appear.
• Scan Duplex: This feature especially applies when the original documents to be scanned
are two-sided.
File Name: Names a file before you scan a document.
•
• File Policy: You can choose the policy for generating file name before you proceed with the
scan job through USB. If the USB memory already has the same name when you entered a
new file name, you can rename or overwrite it.
Press the home icon (
5
Resolution
100, 200,
300, 600
) button.
) to return to the Standby mode.
Color Format
Color, JPEG, BMP , TIFF,
Gray, PDF, Single-TIFF,
Mono Multi-TIFF
Duplex
Off, Short
Edge, Long
Edge
157