Dell 2355 Mono Laser User Manual page 292

Condition
Receiving Faxes are not been
printed by the printer
The printer is not sending fax.
No dial tone sound.
The printer dials a number, but
the connection with another fax
machine fails.
Faxes stop during sending.
Outgoing fax calls continue to be
dialed.
Successfully Send faxes job is not
been received at the other fax
machine.
Send faxes have a shading at the
trailing edge of each media.
Suggested solutions
Receive Forward feature might be turned Off, try enabling this setting. You can set the
printer to forward all incoming faxes to specified e-mail addresses. Please carry out
Line Test
from Op-panel to confirm line status. See "Testing Fax line connection".
• If your printer is on a PBX system, the PBX system might be generating a dial tone
that the printer cannot detect.
• Fax Line might have signal integration issues. Please carry out
Op-panel to confirm line status. See "Testing Fax line connection".
• Check that the phone line is connected properly. Please carry out
Op-panel to confirm line status. See "Testing Fax line connection".
• Check that the phone socket in the wall is working by plugging in another phone.
• Fax Line might have signal integration issues. Please carry out
Op-panel to confirm line status. See "Testing Fax line connection".
The other fax machine may be turned off, out of paper, or cannot answer Receiving
calls. Speak with the other machine operator and ask her/him to sort out the problem.
• The fax machine to which you are sending might be malfunctioning.
• Your telephone line might not be working.
• A communication error might be interrupting the fax job.
• A poor telephone connection might exist.
• The fax machine to which you are sending might be malfunctioning.
• The printer is monitoring line condition while it is receiving or sending a fax job. If an
error occurs during the transmission and the ECM Mode setting is On, the printer
may request that the portion of the fax job to be resent. You should turn off ECM
Mode only if you are having trouble sending or receiving a fax job, and you are willing
to accept the errors in the transmission job. Turning off the setting might be useful
when you are trying to send a fax long distant or receive from long distant (example:
other countries etc.)
• Your telephone line might not be working.
The printer automatically redials a fax number if the redial options are set to On.
• The receiving fax machine might be off or might have an error condition, such as
being out of paper.
• A fax might be in memory because it is waiting to redial a busy number, other jobs
that are ahead of it are waiting to be sent, or the fax is set up for a delayed send.
DADF (Flat-bed) scan size might be set to incorrect size.
Fax
Fax Line Test
from
Fax Line Test
from
Fax Line Test
from
291