Connect the other end of the cable to an available USB port on the computer, not the
3
USB keyboard.
Connecting the printer to the Network
Ensure that the printer, computer, and any other attached devices are powered off and
1
unplugged.
Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable
2
to a LAN drop or hub, and the other end to the Ethernet network port on the back of the
printer. The printer automatically adjusts for the network speed.
NOTE:
panel. See "Printing a Network Configuration Page".
38
After connecting the printer, you need to configure the network parameters on the operator