Dell PowerEdge M420 Administrator's Manual page 20

2
Port mapping
3. Enter the ag
Removing internal ports (F_Ports) from external ports (N_Ports)
1. Connect to the FC SAN Module and log in using an account assigned to the admin role.
2. Enter the ag
3. Enter the switchshow command to verify that the internal port is free (unassigned).
6
mapshow command and specify the port number to display the list of mapped
--
internal ports (F_Ports). Verify that the added internal ports (F_Ports) appear in the list.
switch:admin> ag --mapshow 13
N_Port
Failover(1=enabled/0=disabled) : 1
Failback(1=enabled/0=disabled) : 1
Current F_Ports
Configured F_Ports
PG_ID
PG_Name
mapdel command to remove the internal port from the external port.
--
The f_portlist can contain multiple internal port numbers separated by semicolons, for
example "17;18".
switch:admin> ag --mapdel 17;18
F-Port to N-Port mapping has been updated successfully
Unassigned F_Port status is Disabled (No mapping for internal port). See port 6 in the following
example.
switch:admin> switchshow
switchName: fsw534_4016
switchType: 45.0
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:02:1d:b0
switchBeacon: OFF
Area Port Media Speed State
=====================================
0 0 cu AN
1 1 cu AN
2 2 cu AN
3 3 cu AN
4 4 cu AN
5 5 cu AN
6 6 cu AN
7 7 cu AN
8 8 cu AN
9 9 cu AN
10 10 -- N4
11 11 -- N4
12 12 -- N4
13 13 id N4
14 14 id N4
15 15 id N4
: 13
: None
: 6;7
: 0
: pg0
Proto
No_Sync
No_Sync Disabled (N-Port Offline for F-Port)
No_Sync Disabled (N-Port Offline for F-Port)
No_Sync Disabled (N-Port Offline for F-Port)
No_Sync Disabled (N-Port Offline for F-Port)
No_Sync Disabled (N-Port Offline for F-Port)
No_Sync Disabled (No mapping for F-Port)
No_Sync
No_Sync
No_Sync
No_Module
No_Module
No_Module
Online N-Port
Online N-Port
Online N-Port
Dell 8/4Gbps FC SAN Module Administrator's Guide
10:00:00:05:1e:35:10:1e 0x5a0a00
10:00:00:05:1e:35:10:1e 0x5a0900
10:00:00:05:1e:35:10:1e 0x5a0800
53-1001345-01