Dell PowerEdge M420 Administrator's Manual page 61

8/4 gbps fc san module administrator's guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

firmwareDownloadStatus
Displays the status of a firmware download.
Synopsis
firmwaredownloadstatus
Description
Use this command to display an event log that records the progress and status of events during
FOS, SAS, and SA firmwaredownload. The event log is created by the current firmwaredownload
command and is kept until another firmwaredownload command is issued. There is a timestamp
associated with each event.
When downloading SAS or SA in systems with two control processor (CP) cards, you can only run
this command on the active CP. When downloading FOS, the event logs in the two CPs are
synchronized. This command can be run from either CP.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to
Admin Domain restrictions"
Operands
none
Examples
The following example shows the status of the firmwaredownload for an SAS image to the blades in
slot 2 and 7.
Dell 8/4Gbps FC SAN Module Administrator's Guide
53-1001345-01
The switch is a single-CP switch in an interop fabric and does not support Coordinated HotCode
Load.
"Understanding Virtual Fabric restrictions"
on page 33 for details.
switch:admin> firmwaredownloadstatus
[1]: Thu Jul 28 00:30:49 2007
Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to 30
minutes.
[2]: Thu Jul 28 00:30:49 2007
Slot 7 (SAS): Firmware is being downloaded to the blade. It may take up to 30
minutes.
[3]: Thu Jul 28 00:37:42 2007
Slot 2 (SAS): Firmware has been downloaded successfully to the blade.
[4]: Thu Jul 28 00:37:42 2007
Slot 7 (SAS): Firmware has been downloaded successfully to the blade.
[5]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Blade is rebooting.
[6]: Thu Jul 28 00:37:50 2007
Slot 7 (SAS): Blade is rebooting.
[7]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Firmware commit is started.
[8]: Thu Jul 28 00:37:50 2007
Slot 7 (SAS): Firmware commit is started.
[9]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Firmware commit has completed.
firmwareDownloadStatus
on page 32 and
"Understanding
B
47

Advertisement

Table of Contents
loading

Table of Contents