3
Enabling and disabling Failback for a port group
Use the following steps to enable or disable Failback policy on all the external ports (N_Ports)
belonging to the same port group.
1. Connect to the FC SAN Module and log in using an account assigned to the admin role.
2. Use the following commands to enable or disable Failback for a port group:
24
•
Enter the ag
failbackenable pg pgid command to enable failback on a port group.
--
switch:admin> ag --failbackenable -pg 3
Failback policy is enabled for port group 3
•
Enter the ag
failbackdisable pg pgid command to disable failback on a port group.
--
switch:admin> ag --failbackdisable -pg 3
Failback policy is disabled for port group 3
Dell 8/4Gbps FC SAN Module Administrator's Guide
53-1001345-01