Setting Up Menu 2 Of 3 In Multiplex Mode - Panasonic AJ-FX216 Operating Instructions Manual

B. Setting up MENU 2 OF 3 in
MULTIPLEX mode
The context of MENU 2 OF 3 will not change if the
SYSTEM MODE parameter in MENU 3 OF 3 is
changed.
An example is shown below.
1. TITLE SETUP
A title consisting of up to 8 alphanumeric characters
can be displayed on the monitor.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY
STILL/ALARM DISP
1. Move the cursor to SETUP in TITLE SETUP.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY
STILL/ALARM DISP
2. Press button 15 (SET). The TITLE menu appears on
the monitor.
** TITLE **
1........
2........
3........
4........
5........
6........
7........
8........
3. Move the cursor to the channel number whose title
is to be edited by pressing buttons 9-12
B B
).
4. Select the first character for the title by pressing
button 13 ( ) or 14 (+).
Characters for the title can be selected from the fol-
lowing list:
ABCDEFGHIJKLM
NOPQRSTUVWXYZÄÜÖÆÑÅØ
0123456789
=?'"#&()*+,
(space mark)
- · /:;.
ON
ON
ON
ON
9........
10........
11........
12........
13........
14........
15........
16........
(D D C C A A
, ,
5. After selecting the first character, press button 12
(B B
). Then select the second character.
6. Repeat steps 3 to 5 above to complete the title.
7. Repeat steps 3 to 6 to edit the other channels.
8. Press button 15 (SET) to finalize the character
selection. The title is set, and the display returns to
MENU 2 OF 3.
To erase a specific character
1. Select a character to be erased.
2. Select "•" (space mark) to erase the character.
To erase the title of a specific channel
1. Move the cursor to the channel number whose title
is to be erased.
2. Press buttons 13 ( ) and 14 (+) simultaneously.
2. TITLE POSITION
You can select the position on the monitor where
you want the title to be displayed.
1. Move the cursor to POSITION in TITLE POSITION.
2. Press button 15 (SET). The TITLE POSITION setting
is on stand by.
1
3
3. Select the position where the title is to be displayed
by pressing button 11
select any of the 7 positions shown in the diagram
above.
,
4. Press button 15 (SET) to finalize the title position.
The title position is set, and the display returns to
MENU 2 OF 3.
Note:
All channel titles will be displayed in the same
position.
You cannot specify a different position for each
title.
-10-
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP ON
2
4 5 6 7
(A A 12(B B
) or ). You can