rescan
Description This command forces rediscovery of attached disks and enclosures. If both Storage Controllers are
online this command also reassigns enclosure IDs based on controller A's enclosure cabling order. A
manual rescan may be needed after system power-up to display enclosures in the proper order.
A manual rescan is not required to detect when disks are inserted or removed; the controllers do this
automatically. When disks are inserted they are detected after a short delay, which allows the disks
to spin up.
When you perform a manual rescan, it temporarily pauses all I/O processes, then resumes normal
operation.
Syntax
rescan
Example Scan for device changes and re-evaluate enclosure IDs:
# rescan
Success: Command completed successfully.
104 Alphabetical list of commands