Creating A Drivers Diskette; Installing The Replica Drivers And Software - HP D6030A - NetServer - E50 Getting Started

Chapter 3

Creating a Drivers Diskette

If you don't have an HP NetServer Windows NT drivers diskette, you may need to
create one before you can install the T20.
NOTE You do not need to create a drivers diskette if you installed
NT 4.0 using HP Installation Assistant. Installation Assistant
automatically copied the T20 device drivers to
C:\HP\DRIVERS\T20. It automatically copied the files
necessary to install the Stac Replica backup software to
C:\I386\$OEM$\STAC.
You can create your drivers diskette using an HP NetServer or a Windows-based
PC.
To create the drivers diskette from an HP NetServer:
1. Boot the HP NetServer from the HP NetServer Navigator CD-ROM.
2. Click the NetServer Utilities button; then click Diskette Library.
3. Select your NOS version and follow the on-screen instructions for placing
the drivers on a diskette.
To create the drivers diskette from a Windows-based PC:
1. Boot the PC if you have not already done so.
2. Insert the HP NetServer Navigator CD-ROM. The Diskette Library screen
appears.
3. Select your NOS version and follow the on-screen instructions for placing
the drivers on a diskette.

Installing the Replica Drivers and Software

The installation instructions are slightly different for Windows NT 4.0 and
Windows NT 3.51. Please follow the appropriate instructions.
If your HP NetServer is running Windows NT 4.0 or Microsoft BackOffice
Small Business Server:
To add the T20 device driver and install Replica:
1. Log in to the HP NetServer as Administrator.
2. Open the Tape Devices icon in the Control Panel group.
6
Installing Replica