Setup At The Remote Console - HP D7171A - NetServer - LPr Administrator's Manual

Chapter 2
4. The HP Modem Initialization Utility also allows for a case-sensitive
password.
You can enter any alphanumeric combination up to 20 characters in the
space provided. The password you enter here will be required for remote
access to the HP NetServer.
5. Tab to OK and press Enter.
The HP Modem Initialization Utility saves the modem initialization string
and password, and informs you that initialization is about to occur.
HP
When you select Yes, the utility initialized the modem and then puts
the server in standby mode until contacted by the remote console.
>Yes< <Cancel>
6. Select Yes to initialize the modem. (Cancel returns you to the HP Utility
Partition's Main Menu.)
HP
Modem Initialization Utility
Waiting for remote login. . .
Press the space bar to abort remote
console access.
The HP NetServer awaits a call from the remote console and is
functionally disabled until a connection is made. To disable password
protection and return to normal NetServer operation, press the space bar.
NOTE Once the NetServer's modem has been initialized, your HP
NetServer awaits a call from the remote console and is
functionally disabled until a connection is made.

Setup at the Remote Console

You can use pcANYWHERE32 (shipped with each HP NetServer ). Or, you may
use any standard communications program to establish a simple, character-based
terminal connection from a console workstation to the HP NetServer.
The advantage of using pcANYWHERE32 is that it is pre-configured for HP
Remote Console.
10
Installing HP Remote Console Redirection
Modem Initialization Utility