HP D7171A - NetServer - LPr Administrator's Manual page 25

Chapter 3
Table 4: HP NetServer LXr Pro8 Default Serial Port Interrupts
Label
Serial A
For best performance, check the FIFO Enabled box.
Be sure to select the same COM port you identified when you configured the
NetServer during BIOS setup. If necessary, recheck that it is COM 1 by rebooting
the server and pressing [F2] to run the BIOS setup program. On the BIOS Setup
Main Menu, using the arrow keys, cursor to the "Console" pull-down menu. The
server console settings are displayed.
NOTE You must reinitialize the modem to enable Remote Console
Redirection.
After you have finished running the Smart Setup Wizard, the pcANYWHERE32
main program window appears.
pcANYWHERE
menu bar
pcANYWHERE
action button bar
To finish configuration, at the main program window:
1. Click "Be A Host PC."
2. Select the Modem connection item (see illustration below).
Installing Graphic Console Redirection
Port Interrupt
COM 1 3F8h IRQ 4
21