Removing the System Board
(NetServer LH 3r)
To remove the system board from the LH 3r:
1. Rotate the system board retaining latches until they point away
from the chassis, and the system board has come out of its socket
(see Figure 2-4).
2. Slide the system board out of the chassis and place it on a static-
dissipating work surface (see Figure 2-5).
CAUTION
8
Place the NetServer LH 3r system board on the work
surface so that the metal bracket extends off of the
work surface (see Figure 2-5). Failure to orient the
system board this way may result in damage to the
system board when installing memory.