Replacing The Cover; Hp Netserver Lh 3; Hp Netserver Lh 3R - HP D7171A - NetServer - LPr Installation Manual

4 Replacing the Cover

After installing the memory, replace the cover and bezel.

HP NetServer LH 3

1. Insert the tabs inside the cover into the slots in the chassis and
slide the side cover toward the rear. Tighten the thumbscrew at
the front of the cover.
2. To replace the bezel, insert the tabs at the bottom of the bezel
into the slots at the bottom of the chassis front and press the top
of the bezel to the chassis until it snaps into place. Lock the bezel
lock with the key provided.

HP NetServer LH 3r

1. Insert the tabs inside the cover into the slots in the chassis and
slide the side cover toward the rear. Tighten the thumbscrew at
the front of the cover.
2. Unlock the rail locks and slide the NetServer back into the rack
chassis.
15