Installing Dimms; Installation Guidelines - HP D7171A - NetServer - LPr Installation Manual

3 Installing DIMMs

This chapter includes guidelines and instructions for installing DIMMs
in the specified sequence on the system board.
CAUTION

Installation Guidelines

You can use 64 MB, 128 MB, and 256 MB DIMMs for a maximum
capacity of 1 GB of RAM. Note the following installation guidelines
before adding memory:
The minimum memory configuration for the
NetServer LH 3/LH 3r is one 128 MB DIMM.
The system board DIMM sockets are numbered from 0 to 3, as
shown in Figure 3-1.
Use only DIMMs acquired from HP. Contact HP
Customer Support for a list of qualified DIMMs. HP
will not warranty or support configurations that use
non-HP DIMMs.
11