Hp Net Server Rack-Mount Parts List; Definition Of Terms - HP D7171A - NetServer - LPr Installation Manual

Chapter 1
Maintain reliable grounding of rack-mounted equipment. Pay particular
attention to supply connections that are not direct connections to the
branch circuit (for example: power strips).

HP Net Server Rack-Mount Parts List

Make sure that the rack-mount kit that comes with your HP NetServer LT 6000r
contains with the following parts.
Quantity
2
1

Definition of Terms

Terms used in this document are defined in the table below.
Term
Bezel
Control Panel
EIA unit
Cage nut
Rack (rack cabinet,
rack enclosure)
Slide
Slide mounting flange
2
Rack Mounting the HP NetServer
Part
Slides
Template
Definition
A removable plastic face panel that covers entire front of
the HP NetServer.
Display and buttons used to view HP NetServer status and
change system parameters.
Industry standard measurement (1.75 in / 44.45 mm),
consisting of three vertical mounting holes in a rack
column.
Single nut designed to clip behind the rack column and
accept a screw through the hole in the column.
The equipment enclosure in which the HP NetServer will
be installed. This document covers installation in third-
party racks.
Extendible side bracket (attached to the rack chassis
columns) on which the HP NetServer is mounted.
Mounting flange located at either end of the slide.