Table of Contents
Advertisement
Energy saving
9
button
(model dependent)
If the "Energy saving" button (8*) is
switched on, you can save up to 25%
of the energy and 40% of the water
consumption (*), and still achieve
good results when ironing most of your
garments.
It is advisable to use the normal energy
setting only for thick and very wrinkled
fabrics.
(*) In comparison to the maximum
setting.
Note: If you work with the "Energy
saving" function, the variable
steam regulation and temperature
regulation can still be used as
recommended.
10
Auto shut-off
(model dependent)
If during ironing, the steam release
button (17-18*) on the iron handle
is not pressed for a certain length of
time (8 minutes), the steam station will
automatically switch off.
The "auto shut-off" indicator lamp (9)
will lash when auto shut-off has been
activated.
To switch the steam station back on,
press the steam release button again.
Fabric protection
11
soleplate cover
(model dependent)
The fabric-protection soleplate cover
(21*) is used for steam-ironing delicate
garments at maximum temperature
without damaging them. Use of the
soleplate cover also does away with
the need for a cloth to prevent shine on
dark materials.
10
B OS CH
It is advisable to irst iron a small
section on the inside of the garment to
see if it is suitable.
To attach the soleplate cover to the
iron, place the tip of the iron into the
end of the soleplate cover and pull the
elastic strap over the lower rear of the
iron until it its tightly. To release the
soleplate cover, pull the elastic strap
and remove the iron.
The fabric-protection soleplate cover
may be purchased from our customer
service or from our website.
Accessory code
(After-sales)
571510
Calc'n'Clean
12
Advanced
Cleaning the Boiler
To extend the life of your steam
generator and to prevent any build up
of scale, it is essential that you rinse
out the scale collector (4) and the boiler
after several hours of use. If the water
is hard, increase the frequency.
Do not use descaling agents for rinsing
out the boiler, as they could damage it.
Automatic clean warning
Indicator lamp (12*) will lash indicating
that boiler must be rinsed.
1. Check carefully that the appliance is
cold and unplugged for more than 2
hours, and that the water tank (1) is
empty.
2. Fix the iron to the stand by inserting
the tip of the iron into the front slot
and moving the ixation lever (14)
against the heel of the iron.
Name of accessory
(online shop)
TDZ2045
Advertisement
Table of Contents
