Panasonic PT52LCX66 - MULTI MEDIA DISPLAY Service Manual page 34

PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16
2. Remove the Connecting Plate R by removing the 2 Screws (401, 402).
3. 1) Remove the 2 Screws (402) on the Connecting Plate F, and remove the Screw (401) on the left side of the TV Unit.
2) Disconnect Connectors CN4501, CN6000, CN6001, CN6002, CN6008 and the 2 Speaker Connectors and release from
the clampers.
3) To access the GND Wire of the LVDS Cable, slide the TV Unit with the Digital Tuner P.C.B. along the Guide Tabs.
4) Remove the Screw (402) on GND Wire of LVDS Cable, and disconnect the LVDS Cable from Connector CN5700.
Note: refer to next page.
5) Remove the TV Unit with the Digital Tuner P.C.B.
402
GND Wire of
LVDS Cable
401
Speaker Connectors
Connecting Plate F
Speaker
Connectors
CN6001
CN5700
(From Power
(From LCD
Switch P.C.B.)
Drive P.C.B.)
CN6008
(From LCD
Drive P.C.B.)
Clamper
CN4501
(From Power P.C.B.)
<Bottom View of TV Unit>
TV Unit
with Digital Tuner P.C.B.
Slide
401
Connecting Plate R
CN6000
(From Power
P.C.B.)
Connecting
Plate F
CN6002
(From Power
P.C.B.)
Fig. D1-2
34
Guide Tabs (x2)
402
401
402
402
402