Panasonic PT52LCX66 - MULTI MEDIA DISPLAY Service Manual page 39

REMOVAL OF THE POWER P.C.B. FROM THE CABINET
1. Remove the Rear Cover Unit. Refer to Step 1 in "REMOVAL OF THE TV UNIT AND THE DIGITAL TUNER P.C.B. FROM THE
CABINET."
2. 1) Open the Power P.C.B/Power PCB Mount Metal by removing the 6 Screws (402, 421).
2) Disconnect Connectors CN1522, CN1514, CN1516, CN1520 (Thermal Fuse) and release from the clampers.
3) Remove the Lamp Unit by turning the Knob from the front.
3. 1) Disconnect the Lamp Connector by removing the 2 Screws (451).
Power PCB Mount Metal
421 421
Reassembly Note for Lamp:
After installing the Lamp Unit, confirm that the Lamp Unit will not come out by pulling on the Knob.
Knob
Open
<With Power P.C.B/Power PCB Mount Metal opened>
402
402
421
421
CN1001
(AC Cord)
This screw is
deleted on a
running change
basis.
Fig. D4-1
39
PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16
Power P.C.B.
Lamp
/Power PCB
Mount Metal
421
421
421
421
Lamp Connector
451
Power P.C.B.
CN1522 CN1514 CN1520
(From (From (From
Main Thermal
Main
P.C.B.) Fuse)
P.C.B.)
402
402
This screw is
deleted on a
running change
basis.
451
CN1516
(From Base
P.C.B.)