Panasonic PT52LCX66 - MULTI MEDIA DISPLAY Service Manual page 37

3. 1) Remove the Top Duct 3 Unit by removing the 4 Screws (421).
CAUTION:
When removing the Screws (421) on the Top Duct 3 Unit, plastic dust may be produced. Therefore, confirm that there is no dust
on the Top Duct 3 Unit. If there is dust, clean the Top Duct 3 Unit with a brush, etc. Otherwise, dust may adhere to the inside
of the screen.
2) Remove the Lamp Unit by turning the Knob.
Knob
Lamp
Unit
LVDS
Cable
Replacement Note of Projection Unit:
1. After replacing the Projection Unit, be sure to perform "ADJUSTMENT of Projection Unit." Refer to "WHEN INSTALLING
THE PROJECTION UNIT OR THE BASE BODY UNIT INTO THE UNIT AT THE USER'S LOCATION:."
2. These parts will be necessary when replacing. Set aside, keep, and re-use.
- Top Duct 3 Unit
- Lamp Unit
Top Duct 3 Unit
Fig. D2-2
37
PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16
421
421
Projection Unit
21