Panasonic PT52LCX66 - MULTI MEDIA DISPLAY Service Manual page 35

Grasping the center of both sides of the sheet or cable with your fingers, slowly and steadily
pull the LVDS Cable straight out from the connector. Do not joggle the LVDS cable while
disconnecting. Reconnecting is done in the same manner.
CN5700
or
CN2502
4. 1) Disconnect Connector DT10.
2) Remove the Digital Tuner P.C.B. by removing the 6 Screws (402, 480). (BtoB Connector DT12 is disconnected.)
Note:
If the Digital Tuner P.C.B. is difficult to remove, remove the Rear Jack Holder by removing the 6 (or 7: PT-52/56LCX16, PT-52/
61LCX66-K, PT-56LCX15-K) Screws (402, 452) and releasing the Locking Tab.
TV Unit
Rear Jack Holder
Note:
Straight out
Sheets (both sides)
For early models:
LVDS Cables without sheets
are done in the same manner.
Digital Tuner P.C.B.
DT10
DT12
402
*
Locking Tab
Fig. D1-3
35
PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16
LVDS Cable
480
*
402
*
452
(PT-52/56LCX16,
*
452
PT-52/61LCX66-K,
PT-56LCX16-K)
*
452
402
*
402
*
402
*
480
480
480
480