Installing An Lcc; Removing An Lcc - Dell DAE2-ATA Hardware Reference Manual

Servicing a DAE2
Figure 3-11

Installing an LCC

3-16 2-Gigabit Disk-Array Enclosure (DAE2) Hardware Reference
2. Turn the latch counterclockwise to release the module, and then
remove the LCC from its slot, as shown in Figure 3-11.
Latch

Removing an LCC

Continue to the next section to install the replacement LCC.
1. Gently insert the LCC as shown in Figure 3-12. Be sure the module
is completely seated in the DAE2 midplane.
EMC2774