Size and Weight
Drive Type
LCC FC-AL Interface
Copper Cabling
Requirement
Measurement
Height
133.35 mm (5.25 in)
3 NEMA units including mounting hardware
Width
450 mm (17.72 in)
Depth
603.25 mm (23.75 in)
Weight
43.2 kg (95.3 lbs) maximum configuration
1.1 kg (2.4 lbs) per FC disk module;
1.125 kg (2.5 lbs) per ATA module
1.4 kg (3 lbs) per link control card
4.1 kg (9 lbs) per power supply
12.7 kg (28 lbs) chassis and midplane
The DAE2 uses 3.5-inch (8.75 cm) by 1.0-inch (2.54 cm) disk drives.
Standard, Fibre Channel versions are 12-volt, and support the Fibre
Channel interface. ATA versions are 12- and 5-volt and support the
ATA-6 interface.
Each drive slot provides an average maximum of 16 W drive module
power.
Refer to the EMC Storage Systems CX-Series Disk and FLARE OE Matrix
for a list of supported drives.
Connectors are shielded HSSDC (High Speed Serial Data Connector).
Type:
Shielded, 150
shell (360 )
FC-PI Standard, Revision 13 or higher
Length:
1 meter (3.3 feet) unequalized;
5 meter (16.5 feet) and 10 meter (33 feet) equalized
differential, shield bonded to HSSDC plug connector
Enclosure Specifications
Technical Specifications
A-3