Control Reference Guide; Front And Rear View - Panasonic AG-MSU10 Operating Instructions Manual

Front and Rear View

Front view

1 1
 Rear view
5 5
1.
P2 card slot
This slot is designed for P2 cards.
Before inserting a P2 card, make sure that the
EJECT button is in. Hold the card level as you
insert it.
 For details, refer to "Inserting a P2 card"
(page 20).
 NOTE:
• Never insert anything in the slot except P2 cards.
2.
EJECT button
Press to eject P2 cards from the slot.
 For details, refer to "Removing a P2 card"
(page 20).
3.
Interface box slot
This slot is designed for an interface box (AG-
MBX10G). Hold the box level as you slide it
into the slot.
 For details, refer to "Inserting and Removing
Interface Boxes" (page 21).
1

Control Reference Guide

2 2
6 6
3 3
 NOTE:
• Never insert anything in the slot except an interface
box.
• Turn off the unit before inserting and removing
interface box.
4.
Front door lock lever
Slide the lever to open the front door and insert
or remove an interface box.
 For details, refer to "Inserting and Removing
Interface Boxes" (page 21).
5.
Battery lock release button
Use this button to remove a supplied battery or
AC adapter.
 For details, refer to "Disconnecting the Bat-
tery" (page 16).
6.
Power inlet
Insert the supplied battery or AC adapter here.
 For details, refer to "Connecting and Dis-
connecting the Battery and the Power
Cable" (page 16).
4 4
a a