Panasonic AG-MSU10 Operating Instructions Manual page 27

 Partition type and copy results
Partition type
TYPE S
FAT
*
1
: Each folder consists of a hierarchy involving a date folder and a lower folder called a time folder.
Example: A folder created at 12:34:56 on March 30, 2010 will have the following structure:
/10-03-30/12-34-56
*
2
: It is not possible to copy P2 cards that are larger than the storage device.
 NOTE:
• Use the steps below to automatically compare the original P2 card data with data copied to the storage device when using
a TYPE S format for copying. Select [SETTING]  [VERIFY] from the menu.
 For details, refer to "Menu list" (page 38).
• Use the steps below to set a buzzer that will notify you when copying ends, when the device is powered up and of any
errors that might occur. Select [SETTING]  [BUZZER] from the menu.
 For details, refer to "Menu list" (page 38).
Copy result
A separate partition is created for each card and all data on
the card is copied to this partition.
The Explore screen on the unit allows you to check the model
number and serial number of a P2 card.
*
1
A separate folder is created for each card and all data on
the card is copied to this folder.
The Explore screen on the unit allows you to check the name
of the folder.
Number of P2
cards that can be
*
2
copied
23
100