Turning The Unit On And Off; Turning The Unit On; Turning The Unit Off; Auto Power Off During Operation - Panasonic AG-MSU10 Operating Instructions Manual

Use the supplied battery or AC adapter to power
the unit.
 For details, refer to "Connecting the Battery"
(page 16).
 For details, refer to "Connecting the Power Ca-
ble" (page 16).
Make sure that the battery or the AC adapter is
properly connected to the unit. Turn the unit on be-
fore starting. And turn the unit off when you finish.

Turning the unit on

Hold down the POWER button for 1 second or lon-
ger to turn the unit on when it is off.
The POWER LED lights green when the unit has
started up.
POWER LED POWER LED
POWER button POWER button

Turning the unit off

Hold down the POWER button for 2 second or lon-
ger to turn the unit off when it is on.
The POWER LED goes out. But the POWER LED
flashes while the unit is being shut down.
 NOTE:
• When a low battery voltage occurs (and the battery icon
is red), turn off the unit and replace the battery with a
charged battery or switch to the AC adapter and turn on
the unit.
1

Turning the Unit on and off

Auto Power Off During
Operation
This unit will automatically power down after 10
minutes of inactivity when copying or formatting is
not performed.
To use the unit, turn it on again.
 NOTE:
• Use the steps below to set the time until auto power off
is activated. Select [SETTING]  [AUTO POWER OFF]
from the menu.
 For details, refer to "Menu list" (page 38).
• When the unit is used as a USB or eSATA device, it is not
turned off automatically when inactive. Turn the unit off
when it is not used.