Installing And Removing Interface Boxes; Installing An Interface Box In The Unit; Removing The Interface Box From The Unit - Panasonic AG-MSU10 Operating Instructions Manual

Installing and Removing Interface Boxes

Install a commercially sold SSD (Solid State Drive) in the
AG-MBX10G removable interface box before use.

For details, refer to "Interface Box Setup" (page 42).
Installing an Interface Box in
the Unit
1
Turn the unit off.
2
Slide the front door lock lever to open the
front door.
3
Insert the interface box in the interface
box slot and slide it fully into the slot.
4
Close the front door.
 NOTE:
• Always turn the unit off before installing the interface box.
Installing the interface box when the unit is on, may dam-
age the unit, the interface box or the SSD.
Removing the Interface Box
From the Unit
1
Turn the unit off.
2
Slide the front door lock lever to open the
front door.
3
Slide out the interface box.
4
Close the front door.
 NOTE:
• Always turn the unit off before removing the interface
box. Removing the interface box when the unit is on, may
damage the unit, the interface box or the SSD.
1