Department ID Management
This section describes how to change the password and page limit, and how to
check the print totals when a control card is being used.
NOTE
•
The maximum number of digits that you can store for the password is seven. If you enter
fewer than seven digits, the machine stores the password with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
•
You can set the page limit from 0 to 999,999 pages.
Changing the Password and Page Limit
1
Additional
Functions
Press [Additional Functions].
ADD. FUNCTIONS
1.COMMON SETTINGS
2
Press [
press [OK].
If the System Manager ID and System Password have been set, enter the System
OK
Manager ID and System Password using the numeric keys ➞ press
ADD. FUNCTIONS
9.SYSTEM SETTINGS
The <SYSTEM SETTINGS> menu appears.
3
Press [
press [OK].
OK
SYSTEM SETTINGS
3.MANAGE DEPT. ID
The <MANAGE DEPT. ID> menu appears.
] until <SYSTEM SETTINGS> appears ➞
] or [
] until <MANAGE DEPT. ID> appears ➞
] or [
SYSTEM SETTINGS
1.SYS. MANAGER INFO
MANAGE DEPT. ID
Card Reader-E1
4
(ID).
ID
ON
4-19