Specifying Department Id Management - Canon IMAGERUNNER 2016 Reference Manual

Specifying Department ID Management

Follow the procedure below to enable Department ID Management.
1
Additional
Functions
2
OK
6
3
OK
4
OK
5
Stop
6-8 Department ID Management
Press [Additional Functions].
ADD. FUNCTIONS
1.COMMON SETTINGS
Press [ ] or [
press [OK].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys ➞ press
ADD. FUNCTIONS
9.SYSTEM SETTINGS
The <SYSTEM SETTINGS> menu appears.
Press [ ] or [
press [OK].
SYSTEM SETTINGS
3.MANAGE DEPT. ID
The <MANAGE DEPT. ID> menu appears.
Press [ ] or [
If you do not want to use Department ID Management, select <OFF>.
MANAGE DEPT. ID
The Department ID Management is set.
Press [Stop] to return to the Standby display.
] until <SYSTEM SETTINGS> appears ➞
SYSTEM SETTINGS
1.SYS. MANAGER INFO
] until <MANAGE DEPT. ID> appears ➞
MANAGE DEPT. ID
] to select <ON> ➞ press [OK].
MANAGE DEPT. ID
ON 1.REGISTER DEPT. ID
(ID).
ID
OFF