Setting The Fixing Unit Offset Mode - Canon IMAGERUNNER 2016 Reference Manual

Setting the Fixing Unit Offset Mode

While making prints, offset (a condition that a previously printed image also
appears faintly on the next output) may occur when you suddenly increase the
width of the paper for printing. This mode enables you choose whether to set a high
priority on avoiding offset or on speed.
1
Additional
Functions
OK
2
OK
7
3
OK
4
Stop
7-40 Adjusting the Machine
Press [Additional Functions] ➞ [
<ADJUST./CLEANING> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Print Quality and Density
Improvement," on p. 7-35.
The <ADJUST./CLEANING> menu appears.
Press [ ] or [
press [OK].
ADJUST./CLEANING
10.FIX. UNIT OFFSET
The <FIX. UNIT OFFSET> menu appears.
Press [ ] or [
<SPEED PRIORITY 2>, or <OFF> ➞ press [OK].
FIX. UNIT OFFSET
SPEED PRIORITY1
Details of each item are shown below.
<OFF>: Quality is set as a high priority.
<SPEED PRIORITY 1>: Speed is set as a high priority.
<SPEED PRIORITY 2>: Speed is set as a medium priority.
The Fix. Unit Offset mode is set.
Press [Stop] to return to the Standby display.
] or [
] until <FIX. UNIT OFFSET> appears ➞
FIX. UNIT OFFSET
] to select <SPEED PRIORITY 1>,
ADJUST./CLEANING
11.AUTO ADF DRTY ADJ
] until
OFF