Epson Stylus COLOR 1520 Service Manual page 76

4. Remove 3 screws (CBB, 3X12) and 2 screws (CBB, 4X2) securing the upper housing to the lower
housing.
5. Insert the tweezers into the cutouts at the bottom of the upper housing to release the hooks fixing the
upper housing to the lower housing. Then remove the upper housing.
; After replacing the upper housing or printer cover, be sure to attach the label such as the
CAUTION label to the specified position.
Rev. A
WORK POINT
Figure 3-4. Upper Housing Removal
Disassembly and Assembly
3-5