Adjust Lever - Epson Stylus COLOR 1520 Service Manual

1.2.7 Adjust Lever

The adjust lever , located at the left and upper side of the printer , is used to adjust the gap between the
paper and platen. The adjust lever must be set to the proper position the paper type in order to prevent the
paper from smudging.
Cut sheet
Transparency
Continuous paper
Index card
Envelopes
Rev. A
Table 0-12. Adjust Lever Position
Paper
Type
Far side (0)
Near side (+)
Figure 0-6. Adjust Lever Settings
Lever Platen Gap Adjustment
Position
Product Description
Value
0 mm
+ 0.7 mm
11