Screen Saver, Screen Wipe & No Signal Shutdown - Hitachi 42PD3000 User Manual

0
CLE-952A
4
Press the cursor DOWN button to select SCREEN SAVER.
Once highlighted, use LEFT/RIGHT buttons to adjust the options i.e. 1,
5
6
Screen Wipe
This feature is used to remove any persistence that can occur with stationary pictures. To operate this facility please see
Enter the FEATURES menu as above. Press the cursor DOWN
1
2
3
4
No Signal Shutdown
If your TV signal is lost for more than approx. 20 seconds, your screen will automatically switch into 'Power Saving' mode.
The LED's on the front of the plasma screen and the AVC unit will both turn yellow. The picture will reappear immediately a
40
Screen Saver
This feature moves the picture around the screen in small amounts, at set intervals, to
reduce persistence. This is where stationary objects, such as screen logos, leave a slight image
1
Press the MENU button to obtain
2
Press the cursor DOWN button to
3
Once highlighted, accept selection.
2, or 3 :-
OPTION 1 = 20 minutes
OPTION 2 = 40 minutes
OPTION 3 = 60 minutes
To return to normal TV operation, press the TV button on your handset.
button to select SCREEN WIPE.
Once highlighted, press OK to activate SCREEN WIPE.
The screen will now turn white. Leave the set like this for approx. 10 minutes.
To return to normal TV operation, press the TV button on your handset.
visible after they should have disappeared.
MAIN MENU.
select FEATURES.
below.
signal is received.