Hitachi 42PD3000 User Manual page 42

PC FULL
PC NORMAL
PC REAL
setting menu options
Use these menus to set the contrast, brightness, vertical and horizontal shift etc. Please follow the steps below.
1
Press the MENU button. The PC SETUP 1 menu appears.
We recommend that you use the AUTO option. Highlight AUTO and press
2
the OK button on your handset. You should not, under normal
circumstances, need to adjust the other controls, but if you do, please
Press the UP/DOWN cursor buttons to select each option and the
3
LEFT/RIGHT cursor buttons to change. Please see below for details
Once you have altered the options, highlight PC SETUP 2 and press
4
You will now enter the PC SETUP 2 menu. Press the UP/DOWN cursor
5
buttons to select each option and the LEFT/RIGHT cursor buttons to
change. Please see below for details on each of these options.
Once you have altered the options, press the TV button to return to
6
SETUP OPTIONS
Vertical Shift
CLK
STD
Contrast &
Brightness
PCS
42
This mode fits the image to the full screen size.
This mode fits the image to a 4:3 screen size.
This mode gives the image the same shape as it is displayed on a computer monitor.*
*Please Note: This format is only available for True VGA e.g. 640 x 480 - OK , 800 x 600 - not available.
see the following.
on each of these options.
the LEFT/RIGHT cursor buttons.
normal PC Mode.
Moves the picture up or down.
Use this control to remove any vertical
interference.
Use this control to return the current
setting to shipping condition.
Same as for TV operation
Please Note: The settings you choose for
PC mode will remain when you return to
normal TV operation.
This selects audio input in PC mode AV3
audio input or AV4 audio input can be
selected for PC mode.
Horizontal Shift
Moves the picture left or right.
PHS Use this control to remove any horizontal
Picture
This control makes the picture clearer.
Enhancement
This determines the input level to the AVC
PCL
unit from your computer. This is normally
set to 0.7V but if the picture appears
saturated, (too bright), select 1.0V.
PCW This selects audio input in PC mode while
PC WINDOW is displayed.
PC audio or AV audio can be selected.
+ 0
+ 0
+ 0
0
+ 31
+ 0
OFF
0. 7V
AV3
PCW PC
interference.