Hitachi SJ300 Series Quick Reference Manual page 32

Func.
Code
C073 Communication data length selection
• 07 7-bit data
C074 Communication parity selection
• 00 No parity
• 02 Odd parity
C075 Communication stop bit selection
• 01 1 stop bit
C078 Communication wait time
C081 [O] input span calibration
C082 [OI] input span calibration
C083 [O2] input span calibration
C085 Thermistor input tuning
C086 [AM] terminal offset tuning
C087 [AMI] terminal meter tuning
C088 [AMI] terminal offset tuning
C121 [O] input zero calibration
C122 [OI] input zero calibration
C123 [O2] input zero calibration
C091 Debug mode enable
• 00 Display
C101 Up/Down memory mode selection
• 00 Clear last frequency (return to F001)
• 01 Keep last freq. adjusted by UP/DWN
C102 Reset mode selection
• 00 Cancel trip state at input signal ON transi-
tion, Stops inverter if in Run Mode
• 01 Cancel trip state at signal OFF transition,
Stops inverter if in Run Mode
• 02 Cancel trip state at input signal ON transi-
tion, no effect if in Run Mode
C103 Restart mode after reset
• 00 Restart at 0 Hz
• 01 Resume after frequency matching
C111 Overload setting (2)
Name / Description
• 08 8-bit data
• 01 Even parity
• 02 2 stop bits
• 01 No display
30
Default
Set
Value
Value
–FE/FU/FR
7
00
1
0.
Factory
calibrated
105.0
0.0
80.
Factory
calibrated
00
00
00
00
Rated
current of
each inverter