Power turn-on sequence
1
Turn on the power of the scanner.
• Press the power switch.
(The LED will now light.)
2
Turn on the power of the host
computer after scanner
.
green
• In case of the USB connection, the host
computer recognizes the scanner auto-
matically when the scanner is powered on
even after the host computer is powered
on.
About LED
LED indicates the status of the scanner as follows:
LED light
Green
Ready to scan or scanning
Green (Blink)
Sleep mode
Orange
Ready to scan or scanning with warning *
Orange (Blink)
Initializing
Sleeping with warning *
Red
An error occurred *
1
*
The rollers need to be cleaned or replaced.
1
2
*
*
Check the status of the scanner using the User utility.
The User utility is included in the CD-ROM.
3
*
With KV-S2048C and KV-S2028C, the LED blinks in green.
's LED lights
Status
1
3
*
2
Component Identification
1
LED
11