Chapter 4 Linkaggregation Feature; About Linkaggregation Feature - Fujitsu PCI Gigabit Ethernet User Manual

Chapter 4 LinkAggregation Feature

This chapter outlines the LinkAggregation feature, and explains the settings required to use this feature.
-

4.1 About LinkAggregation Feature

-
4.2 Configuration of the LinkAggregation Feature
-
4.3 Notes
4.1 About LinkAggregation Feature
This section explains the LinkAggregation feature.
- LinkAggregation Feature
Communication bandwidth and network redundancy (*1) can be improved by grouping two or more network interfaces as one virtual
interface (*2). It is effective when handling large amounts of data, or when providing large-scale customer service.
*1: As long as at least one transmission route available is available, communication will continue.
*2: The maximum number of interfaces in a group is 255.
- Requirements
"Table 4.1 Requirements" show requirements for the LinkAggregation feature.
Table 4.1 Requirements
-
OS: Solaris 10 8/07 or later
-
Server model: SPARC Enterprise
-
GLDv3 interfaces
-
Full duplex communication
-
Same speed for all grouped interfaces
-
TCP/IP connection
- 40 -