Fujitsu PCI Gigabit Ethernet User Manual page 83

Example: Creating VNICs (vnic2_1 and vnic2_2) over fjgi0 (this vanity name is net2).
# dladm create-vnic -l net2 vnic2_1
# dladm create-vnic -l net2 vnic2_2
-
The following example shows how to display VNICs (dladm show-vnic)
dladm show-vnic [vnic-link]
Example: Displaying VNICs (vnic2_1 and vnic2_2).
# dladm show-vnic
LINK OVER
vnic2_1 net2
vnic2_2 net2
-
The following example shows how to create a VLAN interface over a VNIC (dladm create-vnic)
dladm create-vnic -l link -v vlan-id vnic-link
Example: Creating a VLAN interface over a VNIC (vnic2004) of fjgi2 (this vanity name is net4).
# dladm create-vnic -l net4 -v 2 vnic2004
-
The following example shows how to display VLAN interfaces on VNICs (dladm show-vnic)
dladm show-vnic [vnic-link]
Example: Displaying a VLAN interface (vnic2004).
# dladm show-vnic
LINK OVER
vnic2004 net4
-
The following example shows how to create a flow over a VNIC (flowadm add-flow)
flowadm add-flow -l link -a attr=value[,...] -p prop=value[,...] flow
Example: Creating a flow (vnic2_1flow) with transport=tcp as an attribute, maxbw=50 as a property over a VNIC (vnic2_1).
# flowadm add-flow -l vnic2_1 -a transport=tcp -p maxbw=50 vnic2_1flow
Example: Creating a flow (vnic2_2flow) with transport=udp as an attribute, maxbw=50 as a property over a VNIC (vnic2_2).
# flowadm add-flow -l vnic2_2 -a transport=udp -p maxbw=50 vnic2_2flow
-
The following example shows how to display flows over VNICs (flowadm show-flow)
flowadm show-flow [flow]
Example: Displaying flows (vnic2_1_flow and vnic2_2_flow) over VNICs (vnic2_1 and vnic2_2).
SPEED MACADDRESS
1500 2:8:20:a5:f6:e4
1500 2:8:20:82:b:7a
SPEED MACADDRESS
1500 2:8:20:b2:3:5f
- 77 -
(vnic-link: link name of VNIC)
MACADDRTYPE VID
random 0
random 0
(link: physical link,
vnic-id: VID,
vnic-link: link name of VNIC)
(vnic-link: link name of VNIC)
MACADDRTYPE VID
random 1
(link: physical link.
attr=value: attribute and value,
prop=value: property and value,
flow: flow name)
(flow: flow name)