note
If you want to monitor
projectors while they are in
standby mode, select
in the
Standby Mode
Extended menu, then select
. See
Network On
page 128.
Managing Projectors
132
Using EMP Monitor
EMP Monitor lets you use a remote computer to manage your
projectors, whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you've installed the software
(available for Windows only) as described on page 172. The
computer you're using to monitor the projector should already
be connected to your network.
Opening and Closing EMP Monitor
To start EMP Monitor, click
EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder, then it
may already be open. If so, click the icon in the system tray on the
lower-right corner of your screen to display the EMP Monitor
window:
To close EMP Monitor, select
the program icon shown above, then select
or
Start > Programs
All Programs >
.
Click here to start EMP Monitor
from the File menu or right-click
Exit
.
Exit