Epson PowerLite 1705c User Manual page 24

note
The image will be slightly
smaller after adjusting. If
it's important to maintain
the correct aspect ratio, use
the menu system to perform
keystone correction, then use
the remote's button
Resize
to adjust the aspect ratio. See
page 32.
Displaying and Adjusting the Image
24
Using Keystone Correction
To adjust your image when it is wider on the top or bottom, do the
following:
Press one of the two triangular buttons on the projector's control
■
panel, as shown below. Continue pressing the button until you
are satisfied with the shape of the image.
■ Or press the
Menu
select the
Setting
From the Setting menu, select
the pointer button on the remote control to adjust the
keystone setting as needed.
If the image becomes uneven, decrease the sharpness setting. (See
page 117.)
button on the remote control or projector,
menu, and press
Enter
Keystone
.
and press . Use
Enter