Epson PowerLite 1705c User Manual page 56

note:
If you don't need the other
network port
configurations, disable
them by deselecting their
checkboxes.
When you connect in Ad
Hoc mode, your computer
is disconnected from any
other wireless networks. If
you need to remain
connected to your wireless
network, use Access Point
mode, as described on
page 57. Also, make sure
you reconnect to your
original wireless network
when you are done using
the projector.
Presenting Through a Wireless Network
56
3. Make sure Location is set to
Select
Automatic
Select Network Port
Configurations
then select AirPort
4. Select
Network Port Configurations
menu.
5. Under Port Configurations, select
6. Click
Apply Now
7. Click the AirPort icon on the menu bar at the top of the Mac
desktop. You see the AirPort status menu:
Choose the ESSID
you assigned to the
projector
8. Check to make sure AirPort is turned on.
9. Select your projector's ESSID.
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.