Epson Photo 700 User Manual page 111

Troubleshooting
The printed image has incorrect or missing colors
Possible cause
The Ink option is set to
Black.
The printable side of the
paper is face down.
The Halftoning and Color
Adjustment Mode options
are set incorrectly for your
document type.
The ICM (Windows 95) or
ColorSync (Macintosh)
settings are incorrect for
your document.
The ink cartridges are low
on ink or one or more ink
colors are empty.
The colors displayed on
your monitor don't match
the printed colors.
The color settings in your
application software need
adjustment.
The printed image is blurry or smeared
Possible cause
The loaded paper is
damaged, old, or dirty.
The printer's thickness
lever is in the 0 position.
The paper is damp or the
printable side is face down.
You loaded special media
without a support sheet.
Solution
Change the Ink setting to Color. See page 1-2 (Windows) or
page 1-7 (Macintosh) for instructions.
Remove the paper and reload it with the printable side face up.
See page 3-3 for instructions.
Use the correct settings for the project you're printing, following
the instructions on page 2-2 and page 2-4.
Use the Automatic mode setting or choose a different project
type or Rendering Intent setting (Macintosh). See Chapter 2 for
more information.
B
Check the black and
cartridge you may need to replace. See page 5-4 for instructions.
Because your monitor and printer use different technologies to
represent colors, your printed colors cannot exactly match the
colors you see on your monitor screen. Use the ICM (Windows 95)
or ColorSync (Macintosh) settings. See page 2-4 and page 2-8 for
more information.
You may be able to adjust various color settings in your application
software. See your software documentation for more information.
Solution
Remove the paper and reload a new stack with the printable side
face up. See page 3-3 for instructions.
Set the thickness lever to the + position and try printing again. See
page 3-5 for instructions.
Remove the paper and reload a new stack with the printable side
face up. See page 3-3 for instructions.
Follow the special media loading instructions on page 3-2 and on
the paper packaging for media that require support sheets. Also try
loading your media one sheet at a time.
6-8
A
color ink out lights to see which