Loading Panoramic Or Banner Paper - Epson Photo 700 User Manual

If the paper is not loading
correctly, hold the paper
straight while pressing the
E load/eject button to load
the sheet in the printer.

Loading Panoramic or Banner Paper

1. Pull up the paper support extension and pull out the output
tray extensions.
2. To make a 44-inch print with continuous-form computer
paper, first tear off four continuous sheets and remove the
perforations at the edges. If you are using non-perforated
banner paper, cut the paper to the length you want for
easier handling.
3. Slide the left edge guide to the far left.
4. Insert the paper in the printer as shown. The right edge of
the paper should be against the right edge guide. You can
load precut EPSON Panoramic Photo Paper the same way.
5. Slide the left edge guide next to the left edge of the paper.
6. Follow the instructions below to print your image on either
a Windows computer or a Macintosh.
3-9
Printing on Special Media